EN | DE
DSI Tetra
Due to updates, photos may slightly vary from actual product. The last photo shows the latest version.
Xtetr BCR
Controller Overlay
(+ MIDI template)
38,50 EUR
'Xtetr BCR' - Behringer BCR2000 Controller Overlay + MIDI template for the complete and intuitive control of the DSI Tetra
This overlay is available in the following variant:
- Supple material: The rather thin but nevertheless stable & synthetic material elegantly wraps around all bends and is therefore hardly noticeable on the device. The reverse side adheres over the entire surface thanks to a very mild and qualitative adhesive, which makes the overlay easy to remove even after a long time. The total thickness is approx. 0.15 mm (about 2 sheets of paper).
Are you interested in more information about our different materials? Then follow this link:
Controllable functions:
- Layer A und Layer B editable
- Multimode (4-part multitimbral, MIDI channel 1-4)
- Output: Stereo & Quad (1 x stereo or 4 single outputs)
- Normal, Stack, Split Point (C1 - C9)
- Oscillator 1 & 2 (incl. Wave Reset, Unison, Sync, Glide, Slope, etc.)
- LFO 1-4 (incl. Sync, Frequency, Amount, Shape, Destination, etc.)
- Mod 1-4 (incl. Source, Amount, Destination)
- 3 Envelopes (Amp, Filter & Envelope 3)
- LP Filter (incl. Env. Amount, Audio Mod, 2/4 Pole, Velocity, etc.)
- Sequencer 1 (incl. 16 steps, Tempo, Clock, Destination, etc.)
- Arpeggiator (incl. Tempo, Clock, Mode, Latch, etc.)
- Preview button (note C3 - editable)
- BCR2000 programming continues to be available (Store, Learn, Edit, Exit)
- and many more...
Included in your order:
- High quality dual-layer* overlay for Behringer BCR2000
- MIDI template file for BCR2000
- Straightforward, bubble free application - please see instructions
- Small cleaning cloth
- Fixing strips for secure application
- Printed application instructions
- Printed user manual
- Made in Germany
- Worldwide, climate-neutral & safe shipping in a non-bendable cardboard box
- 14 days return policy!
General information:
Tetra is a small and portable analog synthesizer by Dave Smith Instruments (Sequential) with an outstanding sound and a large range of functions.
Unfortunately, only a fraction of functions are controllable directly, which noticeably affects ease of editing. Our ‘Xtetr BCR’ Controller Overlay is here to help. By connecting the BCR2000 controller by Behringer, functions will become accessible through the controller itself.
In the design process of the overlay as well as the MIDI template, special attention was given to straight-forward and intuitive operation of the device.
Consequently, the advantage of a portable instrument remains: on the go (gigs, rehearsal rooms, etc) the synth itself will often suffice, as you will have easily pre-made your sounds in your studio.
It is easy to set up: the self-adhesive overlay is applied to the BCR2000 controller (see instructions). Connect the controller to a computer via USB and transfer the supplied MIDI template file (Mac: Sysex Librarian, PC: MIDI-OX. Your hardware editor for the DSI Mopho is now ready for use!
* The high quality overlays (templates, foils, skins) are produced in cooperation with our partners from the industry in Germany and are punched out to fit perfectly. A 2nd robust top layer of a matt laminate protects the qualitative print optimally (dual-layer process). The entire material consists of a stable synthetic substance, and is therefore protected from dirt and moisture.
Downloads:
